There are two general ways to connect your ModMic Uni / Kimura to a PS4 / PS5:
Connected to the controller with a Y adapter, aka a TRRS/CTIA (tip-ring-ring-sleeve) adapter - the type that lets you plug/combine a mic and headphones into a single 3.5/2.5mm jack. The plug of the adapter should look like the bottom image in the photo below. Make sure the Y adapter has ports labeled specifically for your headphones and your mic.
The connection will be ModMic/Kimura > Y Adapter > PS4/5 controller.
Connected to an open USB port via a USB Sound Card. The connection will be ModMic > USB Sound Card > USB port on the PS4/5. Remember, there are two (2) 10-Gbps USB ports located on the back of the PS5, as well. NOTE: we are aware of reports of the USB ports in the back of the PS5 overheating and melting. More info is here - https://technclub.com/guides/prevent-ps5-melting-usb-ports/
You might have to go into the Audio settings for your console to make sure your ModMic/Kimura is being read by it. Consult your console's instruction manual for more information.
There are other ways, as well, such as via an AMP / DAC. Don't hesitate to contact us at CustomerService@AntlionAudio.com if you have any questions.
Comments
0 comments
Article is closed for comments.